Schwarzbrenner 41 Disc ULImited Front Wheel 2022





  • LKVSB41DuliPssClUli24BeaCer12mmCarCXSNipUPSWsil
  • 4062266213187
We present to you the Schwarzbrenner 41 ULImited! This one is even more radical than the... mehr
Produktinformationen "Schwarzbrenner 41 Disc ULImited Front Wheel 2022"

We present to you the Schwarzbrenner 41 ULImited! This one is even more radical than the Skyline version! The selected spokes are Sapim CX-Super sublimated by carbon ties—a must to maintain lateral stiffness on superlight buildsets. The selected hub is the ultime version of our Princess hub, which is made with the latest generation of aerospace aluminium that is 10% lighter than the usual alloys. The hub is fitted with hybrid ceramic bearings, carbon flange-reinforcement, and carbon endcaps. Each material was selected to achieve the lowest weight possible. It is only available in the lightest colour, silver, with a special lasered logo. The carbon rim has a modern internal width of 19,9mm and is the ultimate lightweight solution for disc wheels, as it will fit tyres from 25mm to 32mm. Its 41mm height makes it a very good compromise between aerodynamics and stiffness. The rim is made with low weight, unidirectional carbon fibre toughened prepreg, which absorbs vibrations and is impact resistant. Uli Fahl is the founder of Tune, and his credo is to reduce the weight of the rotating parts as much as possible. That is why the radical Schwarzbrenner 41 ULImited most closely matches Uli’s philosophy. If you want the lightest aero disc wheel, now you know the history behind the best choice you can make. So, take the ULImited!

Technical data

weight from: 574g
hub type: Princess Ulimited 24 holes with Carbon endcaps, Carbon reinforcement ring and Ceramic Bearings
spokes: carbon tied SAPIM CX-Super Aero Black Inox spokes
max. spoke tension 1100N
max. rider weight: 90kg
max.system weight: 100kg
rim inner width: 19,9mm
rim outer width: 26,7mm
rim height: 41mm
rim standard: 700c clincher
tubeless ready: yes
mandatory rim tape: 22mm Tune Tape, Tubeless Compatible
mandatory valve type: 60mm Tune Tubeless Valve or similar type
tyres and max.pressure: 23mm/8,5bar-25mm/8bar-28mm/7,5bar-33mm/5bar
nipples: SAPIM Anodized, Inverted, Secure Lock
brake interface: Centerlock* disc-brake interface
colours: for hubs and Tune decals, available in Grey only
scope of delivery: wheel and packaging
notes: Screw on the Centerlock* lockring and tighten it with max. 40Nm
For Tubeless Tires only (with or without inner tube)
for more information please refer to the user manual
*Center Lock rotor mounting system licensed by Shimano

from 583g
Rim brake
Carbon rim
from 700g
28mm inner width
Aluminium rim
from 747g
Disc brake
Carbon rim
ab 119g
für 35mm Lenker
from 590g
28mm inner width
Carbon rim
from 614g
Rim brake
Carbon rim
from 648g
Rim brake
Aluminium rim