Schwarzbrenner 41 Disc ULImited Hinterrad

We present to you the Schwarzbrenner 41 ULImited! This one is even more radical than the Skyline version! The selected spokes are Sapim CX-Super sublimated by carbon ties—a must to maintain lateral stiffness on superlight buildsets. The selected hub is the ultime version of our Prince hub, which is made with the latest generation of aerospace aluminium that is 10% lighter than the usual alloys. The hub is fitted with hybrid ceramic bearings to reduce the rolling resistance. Each material was selected to achieve the lowest weight possible. It is only available in the lightest colour, silver, with a special lasered logo. The carbon rim has a modern internal width of 19,9mm and is the ultimate lightweight solution for disc wheels, as it will fit tyres from 25mm to 32mm. Its 41mm height makes it a very good compromise between aerodynamics and stiffness. The rim is made with low weight, unidirectional carbon fibre toughened prepreg, which absorbs vibrations and is impact resistant. Uli Fahl is the founder of Tune, and his credo is to reduce the weight of the rotating parts as much as possible. That is why the radical Schwarzbrenner 41 ULImited most closely matches Uli’s philosophy. If you want the lightest aero disc wheel, now you know the history behind the best choice you can make. So, take the ULImited!

Technical data

weight from: 674g
hub type: Prince ULImited CL 24 holes with Aluminium Endcaps and Ceramic bearings
spokes: carbon tied SAPIM CX-Super Aero Black Inox spokes
max. spoke tension 1100N
max. rider weight: 90kg
max.system weight: 100kg
rim inner width: 19,9mm
rim outer width: 26,7mm
rim height: 41mm
rim standard: 700c clincher
tubeless ready: yes
mandatory rim tape: 22mm Tune Tape, Tubeless Compatible
mandatory valve type: 60mm Tune Tubeless Valve or similar type
tyres and max.pressure: 25mm/5,5bar-28mm/5bar
nipples: SAPIM Anodized, Inverted, Secure Lock
brake Interface: Centerlock* disc-brake interface
colours: for hubs and Tune decals, available in all Tune colours
scope of delivery: wheel and packaging
notes: Screw on the Centerlock* lockring and tighten it with max. 40Nm
For Tubeless Tires only (with or without inner tube)
Remove the spacer on your freehub to switch from HG10 to HG11 and from XD to XDR
for more information please refer to the user manual
*Center Lock rotor mounting system licensed by Shimano
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*microspline system licensed by Shimano
*N3W is a Campagnolo registred trademark