Race 30 29" Endurance Front Wheel 2022





  • LKVR30EndKHBoo32BeaEnd15mmAluDLNipbck
  • 4062266219752
Wide, robust, and ready for every trail! The Race 30 Endurance 29” is the ideal companion... mehr
Produktinformationen "Race 30 29" Endurance Front Wheel 2022"

Wide, robust, and ready for every trail! The Race 30 Endurance 29” is the ideal companion to enjoy on your home trails. The weight of this wheel is as low as possible while still keeping in mind and focusing on durability. The wheel is equipped with our best-selling KillHill hub. The hub is CNC machined in our factory from aerospace grade aluminium, thus demonstrating increased fatigue strength and low weight. The anodising ensures a great look and prevents corrosion, even under the toughest circumstances. Assembled and adjusted by hand in Buggingen, Germany, the Race 30 Endurance 29” boasts the highest quality standards—guaranteed! The geometry has been optimised for a balanced, stiff wheel. The hub is finally fitted with double sealed endurance bearings to ensure flawless reliability. The rim is impact resistant and shot peen finished to increase fatigue life and durability. Also, the rim has a width of 30mm to improve tyre support, which allows lower pressure, less rolling resistance, and better grip on rough tracks. It is ideal for modern trail assembly. This wheel is completed with D-Light spokes from Sapim, which are mounted with Secure Lock nipples to maintain the spoke tension over time. The next time you cannot shuttle, you will enjoy the limited weight of this wheel, and the next uphill climb will not feel like such a chore! So, get on your bike and SEND IT!

Technical data

weight from: 815g
hub type: KillHill 32 holes with Aluminium Endcaps and Endurance Bearings
spokes: SAPIM D-Light Black Inox
max. spoke tension 1100N
max. rider weight: 100kg
max.system weight: 115kg
rim inner width: 30mm
rim outer width: 34,5mm
rim height: 18,5mm
rim standard: 29"
tubeless ready: yes
recommended width tubeless tape: 30mm
recommended length tubeless valve: 35mm
tyres and max.pressure: 2,2"/2,9bar - 2,25"/2,75bar - 2,35"/2,5bar
nipples: SAPIM Anodized, Polyax, Secure Lock
brake interface: Centerlock* or IS6 disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
scope of delivery: wheel and packaging
Notes For Centerlock* brake disc installation, screw on the Centerlock* lockring and tighten it with max. 40Nm
For IS6 brake disc installation, remove the threadlock residues of the 6 screws before installation a calibrated torque wrench to a max torque of 5Nm
For Tubeless Tires only (with or without inner tube)
for more information please refer to the user manual
*Center Lock rotor mounting system licensed by Shimano