TSR22 Disc Skyline 2.0 rear wheel

If you are looking for a lightweight disc wheel with ceramic bearings and the typical riding comfort of an aluminium rim, then the TSR 22 Disc Skyline is for you! The aluminium rim is essential when you are looking for lightness and continuous riding comfort in the passes and on long distances. Moreover, it is UCI certified! The TSR 22 Disc Skyline is very easy to ride up hills thanks to its light weight, and it is fitted with our lightest hub, the Prince Skyline, which is used by elite racers around the world. The hub is CNC machined in our factory from aerospace grade aluminium, thus demonstrating increased fatigue strength and low weight. The anodising ensures a great look and prevents corrosion, even under the toughest circumstances. Assembled and adjusted by hand in Buggingen, Germany, the TSR 22 Disc Skyline boasts the highest quality standards—guaranteed! The geometry has been optimised to increase the comfort of the wheel and reduce the weight. Depending on the application, you can configure the hub with 6Teeth Skyline Freehub to obtain a real Formula 1. The 22mm aluminium disc rim is made with high performance aluminium alloy, which confers competitive weight, great ride stability, and the best durability on the market. It is 22mm high, which gives it vertical compliance and makes it impact resistant. Its impressive vibration damping properties make it very comfortable as well. Finally, the rim’s low weight provides quick and direct acceleration. Although the rims are low profile, aerodynamics are not neglected on these wheels, as evidenced by the Sapim CX Super Black Aero sublimated with carbon tied spokes—a must to maintain lateral stiffness on a superlight buildset. Alpine passes and 200-kilometre rides are no problem with this amazing wheel.

Technical data

weight from: 780g
hub type: Prince Skyline CL 28 holes with Aluminium Endcaps and Ceramic bearings
spokes: Carbon tied SAPIM CX-Super Black Inox Aero Spokes
max. spoke tension 1100N
max. rider weight: 90kg
max.system weight: 100kg
rim inner width: 19mm
rim outer width: 24mm
rim height: 22mm
rim standard: 700c clincher, 700c x 24,5mm, 622 x 19mm
tubeless ready: yes
recommended width tubeless tape: 22mm
recommended length tubeless valve: 35mm
tyres and max.pressure: 25mm/7,5bar-32mm/4,8bar-50mm/3,8bar
nipples: SAPIM Anodized, double square, Polyax, Secure Lock, 16mm
brake Interface: Centerlock* disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
scope of delivery: wheel and packaging
Notes Screw on the Centerlock* lockring and tighten it with max. 40Nm
Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.
for more information please refer to the user manual 
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*microspline system licensed by Shimano
*N3W is a Campagnolo registred trademark