Schwarzbrenner 32 Disc Skyline rear wheel

Light, aerodynamic, comfortable, modern… These are the keywords of the Schwarzbrenner 32 Skyline Disc! The wheel is equipped with our Prince Centerlock hub, which is used by elite racers around the world. The hub is CNC machined in our factory from aerospace grade aluminium, thus demonstrating increased fatigue strength and low weight. The anodising ensures a great look and prevents corrosion, even under the toughest circumstances. Assembled and adjusted by hand in Buggingen, Germany, the Schwarzbrenner 32 Skyline Disc boasts the highest quality standards—guaranteed! The geometry has been optimised to increase the comfort of the wheel and reduce the weight. It is fitted with ceramic bearings to reduce the rolling resistance! The carbon rim has an internal width of 22mm and is the ultimate lightweight solution for disc wheels, as it will fit tyres from 25mm to 32mm. Its 32mm height makes it a very good compromise between aerodynamics and comfort. The rim is made with low weight, unidirectional carbon fibre toughened prepreg, which absorbs vibrations and is impact resistant. The CX-Ray aero spokes will provide you exemplary aerodynamics and lightness. The result is this Schwarzbrenner 32 Skyline Disc, which is the perfect wheel to finish the most difficult Gran Fondo under optimum conditions!

Technical data

weight from: 699g
hub type: Prince CL 24 holes with Aluminium Endcaps and Ceramic bearings
spokes: SAPIM CX-Ray Aero Black Inox
max. spoke tension 1100N
max. rider weight: 90kg
max.system weight: 100kg
rim inner width: 22mm
rim outer width: 27mm
rim height: 32mm
rim standard: 700c clincher
tubeless ready: yes
mandatory rim tape: 24mm Tune Tape, Tubeless Compatible
mandatory valve type: 60mm Tune Tubeless Valve or similar type
tyres and max.pressure: 28mm/5,5bar - 40mm/3,8bar
nipples: SAPIM Anodized, Polyax, Secure Lock
brake Interface: Centerlock* disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune Colours
scope of delivery: wheel and packaging
notes: Screw on the Centerlock* lockring and tighten it with max. 40Nm
For Tubeless Tires only (with or without inner tube)
Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12. Please note that this wheel with 6 Teeth freewheel is not approved for use with 1by groupsets.
for more information please refer to the user manual 
*Center Lock rotor mounting system licensed by Shimano
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*microspline system licensed by Shimano
*N3W is a Campagnolo registred trademark