Race 30K4 Lefty 29" front wheel

Wide, robust, and ready for every trail! The Race 30 (Flow MK4) Lefty 29” is the ideal companion to enjoy on your home trails. The weight of this wheel is as low as possible while still keeping in mind and focusing on durability. The wheel is equipped with our Cannonball 2.0 hub, which will delight Lefty 2.0 or Ocho fork lovers. The wheel is assembled and adjusted by hand in Buggingen, Germany and made with aerospace grade aluminium, which makes it all the more reliable. The Flow MK4 rim from Stan’s NoTubes is made with high performance aluminium alloy, which confers competitive weight, great ride stability, and the best durability on the market. It is asymmetric for a more balanced wheel build and shot peen finished to increase fatigue life and durability. With an inner width of 30mm, the rim provides improved tyre support, which allows lower pressure, less rolling resistance, and better grip on rough tracks. It is ideal for modern trail assembly. This wheel is completed with D-Light spokes from Sapim, which are mounted with Secure Lock nipples to maintain the spoke tension over time. The wheel is available in all Tune colours, so don’t hesitate to take advantage of giving your bike a pure look. The next time you cannot shuttle, you will enjoy the limited weight of this wheel, and the next uphill climb will not feel like such a chore! So, get on your bike and SEND IT!

Technical data

weight from: 830g
hub type: Cannonball 2.0 32 holes with Standard Bearings for Lefty 2.0 and Ocho forks
spokes: SAPIM D-Light Black Inox
max. spoke tension 1100N
max. rider weight: 100kg
max.system weight: 115kg
rim inner width: 30mm
rim outer width: 33,6mm
rim height: 18,9mm
rim standard: 29"
tubeless ready: yes
recommended width tubeless tape: 30mm
recommended length tubeless valve: 35mm
tyres and max.pressure: 2,3‘‘/2,7bar-2,6‘‘/2,3bar
nipples: SAPIM Anodized, Polyax, Secure Lock
brake interface: IS6 disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
scope of delivery: wheel and packaging
Notes For IS6 brake disc installation, remove the threadlock residues of the 6 screws before installation a calibrated torque wrench to a max torque of 5Nm
For Tubeless Tires only (with or without inner tube)
E-bike approved
for more information please refer to the user manual