Blackburner 28 2.0 29" rear wheel

Modern XC-courses get more technical and demanding for the rider and the machinery. Our Blackburner 28 2.0 29” offers a current, extra-wide carbon rim to make your race bike feel like it’s on rails! The wheel is equipped with our best-selling ClimbHill hub. The hub is CNC machined in our factory from aerospace grade aluminium, thus demonstrating increased fatigue strength and low weight. The anodising ensures a great look and prevents corrosion, even under the toughest circumstances. Assembled and adjusted by hand in Buggingen, Germany, the Blackburner 28 2.0 29” boasts the highest quality standards—guaranteed! The geometry has been optimised for a balanced, stiff wheel. The 28mm UD carbon XC 29 rim has a unique profile, with a low sectional height and wide width. These characteristics add radial compliance and lateral stiffness. A wider rim provides improved tyre support, which allows lower pressure, less rolling resistance, and better grip on rough tracks. The rim is manufactured out of low weight, unidirectional carbon fibre toughened prepreg, which is impact resistant and absorbs vibrations. This wheel is completed with D-Light spokes from Sapim, which are two times butted and save weight compared to a conventional spoke. Typical for Tune, this wheel is available in seven colours for the hub, the nipples, and the decals to make your bike as unique as you are. Our Blackburner 28 2.0 29” is made to boost your riding skills on modern tracks!

Technical data

weight from: 742g
hub type: ClimbHill 28 holes with Aluminium endcaps and Standard Bearings
spokes: SAPIM D-Light Black Inox
max. spoke tension 1100N
max. rider weight: 100kg
max.system weight: 115kg
rim inner width: 28mm
rim outer width: 33,5mm
rim height: 22mm
rim standard: 29"
tubeless ready: yes
mandatory rim tape: 30mm Tune Tape, Tubeless Compatible
mandatory valve type: 44mm Tune Tubeless Valve or similar type
tyres and max.pressure: 2,2"/2,9bar - 2,25"/2,75bar - 2,35"/2,5bar
nipples: SAPIM Anodized, Polyax, Secure Lock
brake interface: Centerlock* or IS6 disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
scope of delivery: wheel and packaging
Notes For Centerlock* brake disc installation, screw on the Centerlock* lockring and tighten it with max. 40Nm
For IS6 brake disc installation, remove the threadlock residues of the 6 screws before installation a calibrated torque wrench to a max torque of 5Nm
For Tubeless Tires only (with or without inner tube)
Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.
for more information please refer to the user manual 
*Center Lock rotor mounting system licensed by Shimano
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*microspline system licensed by Shimano