Blackburner 28 2.0 Lefty 29" front wheel

Modern XC-courses get more and more technical and demanding for the rider and the machinery. Our Blackburner 28 Lefty 29” offers a current, extra-wide carbon rim that makes your race bike feels like it’s on rails! The wheel is equipped with our Cannonball 2.0 hub, which will delight Lefty 2.0 or Ocho fork lovers. The wheel is assembled and adjusted by hand in Buggingen, Germany and made with aerospace grade aluminium, which makes it all the more reliable. The 28mm UD carbon XC 29 rim has a unique profile, with a low sectional height and wide width. These characteristics add radial compliance and lateral stiffness. A wider rim provides improved tyre support, which allows lower pressure, less rolling resistance, and better grip on rough tracks. The rim is manufactured out of low weight, unidirectional carbon fibre toughened prepreg, which is impact resistant and absorbs vibrations. It is fitted with Sapim CX-Ray spokes, which have extremely high fatigue test results and are very light. Typical for Tune, this wheel is available in seven colours for the hub, the nipples, and the decals to make your Cannondale bike as unique as you are. Our Blackburner 28 Lefty 29” is made to boost your riding skills on modern tracks!

Technical data

weight from: 608g
hub type: Cannonball 2.0 28 holes with Standard Bearings for Lefty 2.0 and Ocho forks
spokes: SAPIM CX-Ray Aero Black Inox
max. spoke tension 1100N
max. rider weight: 100kg
max.system weight: 115kg
rim inner width: 28mm
rim outer width: 33,5mm
rim height: 22mm
rim standard: 29"
tubeless ready: yes
mandatory rim tape: 30mm Tune Tape, Tubeless Compatible
mandatory valve type: 44mm Tune Tubeless Valve or similar type
tyres and max.pressure: 2,2"/2,9bar - 2,25"/2,75bar - 2,35"/2,5bar
nipples: SAPIM Anodized, Polyax, Secure Lock
brake interface: IS6 disc-brake interface
colours: for hubs, nipples and Tune decals, available in all Tune anodised colours
scope of delivery: wheel and packaging
Notes For IS6 brake disc installation, remove the threadlock residues of the 6 screws before installation a calibrated torque wrench to a max torque of 5Nm
For Tubeless Tires only (with or without inner tube)
for more information please refer to the user manual