Mag Skyline rear hub

This hub has been developed for weight-weenie wheelsets! We used only the finest materials to push the design to its limits. The used aerospace grade Aluminium offers increased fatigue strength and enables us to obtain the fine geometrical tolerances and complex shape. Ceramic-hybrid bearings reduce the rolling resistance of the hub. A bespoke Carbon material is used to reinforce the spoke flanges locally to save the last precious grams. The geometry has been optimized to increase the distance between the flanges in order to increase the lateral stiffness of the wheelset. As we said, a MUST have for weight weenies!

technical data

weight starting from: 166,9g
recommended spokes: SAPIM CX-Ray, SAPIM D-Light
max. spoke tension 1100N
max. rider weight: 90kg
max.system weight: 100kg
field of use: Road

dimensions

flange distance left: 34,6mm
flange distance right: 17mm
pitch circle left: 28,2mm
pitch circle right: 55,5mm
diameter spoke holes 2,4mm
offset spoke hole left flange _
offset spoke hole right flange _
spoke lacing pattern: 24 holes with 12 holes for radial lacing on the left side and 12 holes for 2-cross lacing on the right side, 28 holes with 14 holes for radial lacing on the left side and 14 holes for 3-cross lacing on the right side
Our tune spokelength-calculator will further help you to calculate the needed spoke lengths!

notes__

configuration: Ceramic Bearing with 6Teeth Skyline freehub body / 3Teeth Skyline freehub body
scope of delivery: hub and corresponding packaging if applicable
notice: Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.
for more information please refer to the user manual

 
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*microspline system licensed by Shimano