ClimbHill CL rear hub

Our bestseller disc-brake hub for many years. Now available for the popular Centerlock* disc-brake mount! The best quality/price ratio you can get. Available in all tune colours, assembled and adjusted by hand in Buggingen, Germany. The hub is CNC machined in our factory from aerospace grade Aluminium with an increased fatigue strength. The anodizing ensures a great look and prevents corrosion even under the toughest circumstances. Configure your own hub by choosing your favourite colour and, depending on the application, the most adequate bearing and freehub: for CX or gravel choose the double sealed Endurance bearings with reinforced Endurance freehub body or for triathlon choose the Ceramic bearings! This hub is an unbeatable option for any disc-brake bike!

Technical data

weight starting from: 208,9g
recommended spokes: SAPIM CX-Ray, SAPIM D-Light
max. spoke tension 1100N
max. rider weight: 100kg
max.system weight: 115kg
field of use: 24 holes for Road only, 28 and 32 holes for Road/Cx/Gravel/MTB

Dimensions

flange distance left: 34,4mm
flange distance right: 20,6mm
pitch circle left: 55,5mm
pitch circle right: 55,5mm
diameter spoke holes 2,4mm
offset spoke hole left flange _
offset spoke hole right flange _
spoke lacing pattern: 24 spokes with 2-cross lacing or 28/32 spokes with 3-cross lacing
Our tune spokelength-calculator will further help you to calculate the needed spoke lengths!

Notes

configuration: Endurance Bearings/Ceramic Bearings/Stantard Bearings
scope of delivery: hub and corresponding packaging if applicable
notice: Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.
Screw on the lockring and tighten it with max. 40Nm.
for more information please refer to the user manual
*XD-Compatible licensed by SRAM
*XDR Compatible licensed by SRAM
*center lock rotor mounting system licensed by Shimano
*microspline system licensed by Shimano