SuperClimbHill rear hub

Derived from our classic ClimbHill hub, the SuperClimbHill is made for superboost-bikes, ideal for rougher rides. The hub comes equipped with specially sealed Endurance-bearings and a kick-back resistant Endurance-freehub. Other features include our signature low weight, high durability construction from aerospace grade aluminium with increased fatigue strength - ideal as a base for a lightweight yet stiff wheelset. The hub is available in all tune colours and is CNC-machined and assembled by hand in our factory in Germany. The anodizing ensures a great look and prevents corrosion even under the toughest circumstances.

Technical data

weight starting from: 232g
recommended spokes: SAPIM CX-Ray, SAPIM D-Light
max. spoke tension 1100N
max. rider weight: 105kg
max.system weight: 120kg
field of use: MTB

Dimensions 12X157mm

flange distance left: 41,3mm
flange distance right: 28,1mm
pitch circle left: 55,5mm
pitch circle right: 55,5mm
diameter spoke holes 2,4mm

spoke lacing pattern: 32 spokes with 3-cross lacing Our tune spokelength-calculator will further help you to calculate the needed spoke lengths!

Notes

configuration: Endurance Bearing with Endurance freehub body
scope of delivery: hub and corresponding packaging if applicable
notice: Remove the 1.8mm spacer on your freehub to switch from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freehub to switch from HG10 to HG12.
Threadlock residue must be removed before installation. The brake rotor must be fastened with a calibrated torque wrench to a max torque of 5Nm.
for more information please refer to the user manual
*XD-Compatible licensed by SRAM
*microspline system licensed by Shimano